Loading ...
Loading ...
Loading ...
Chapter 6 Operations and Measurements RIGOL
MSO7000/DS7000 User's Guide 6-25
channels.
Press Overlay to enable or disable the waveform overlay display function.
If enabled, waveforms of different channels will be displayed in the same
position of the screen; if disabled, waveforms of different channels will be
displayed on the screen from top to bottom in sequence.
Press Coupling to enable or disable the coupling hold function. If enabled,
after you press AUTO, the settings for the channel coupling remain
unchanged; if disabled, then the channel coupling is, by default, set to
"DC".
: Press this key to cancel the auto setting and recovers to the parameter
settings prior to pressing the AUTO key.
Note:
The waveform auto setting function requires that the frequency of the signal
should be greater than or equal to 35 Hz, the amplitude greater than or equal to 5
mV. If not meeting the conditions, the waveform auto setting function may be invalid.
Loading ...
Loading ...
Loading ...