Loading ...
Loading ...
Loading ...
Chapter 6 Operations and Measurements RIGOL
MSO7000/DS7000 User's Guide 6-43
adjust the position of Cursor A. The measurement result will change
accordingly during the adjustment, and the adjustable range is limited
within the screen.
Adjust Cursor A: Press CursorB and rotate the multifunction knob to
adjust the position of Cursor B. The measurement result will change
accordingly during the adjustment, and the adjustable range is limited
within the screen.
Adjust Cursor A and Cursor B simultaneously: Press CursorAB and rotate
the multifunction knob
to adjust the position of Cursor A and Cursor B,
and the deviation between cursors (Delta value) remains unchanged. The
measurement result will change accordingly during the adjustment, and the
adjustable range is limited within the screen.
Note:
If one of the three items (Cursor A, Cursor B, and CursorAB) is selected,
you can press down the multifunction knob
continuously to switch
among the three items.
In track mode, the horizontal cursor (or vertical cursor) will track the
marked point in a timely manner (i.g, the cursor will move up and down
with the transient change of the waveform). Thus, the X value (or Y value)
might change even though you do not adjust the cursor.
4. Measurement Example
Measure the waveforms of CH1 and CH2 with Cursor A and Cursor B,
respectively. Then, expand the waveforms horizontally, and you will find that the
cursor will track the point that has been marked, as shown in the following
figure.
Track Measurement (before Horizontal Expansion):
Track Measurement (after Horizontal Expansion):
Loading ...
Loading ...
Loading ...