Rigol MSO7024 User Manual

Loading ...

RIGOL Chapter 6 Operations and Measurements

6-20 MSO7000/DS7000 User's Guide

 Press More  AutoScale to adjust the vertical scale and offset of the operation

results to an optimal value based on the current configuration, so as to better

observe.

 Press More  Invert to enable or disable the inverted display function of the

waveform.

 Press More  Label to set the label for math operation results. For details,

refer to descriptions in "Math Operation Label".

High Pass

Only allows the signals whose frequencies are higher than the current lower limit

frequency to pass.

Press Math  Math1  Operator to select "HighPass":

 Press Operation continuously to enable or disable the "HighPass" operation

function.

 Press SourceA, and rotate the multifunction knob to select the channel for

SourceA. Then press down the knob to select the channel. You can also press

SourceA continuously or enable the touch screen to select the channel. The

available channels for SourceA are CH1, CH2, CH3, and CH4.

Note: Only the channels that have been enabled currently can be selected.

 Press Offset to set the vertical offset of the operation results. For setting

methods, refer to the descriptions in "Parameter Setting Method". You can

also directly rotate Wave Vertical

POSITION or enable the touch screen

to adjust the vertical offset.

 Press Scale to set the vertical scale of the operation results. For setting methods,

refer to the descriptions in "Parameter Setting Method". You can also

directly rotate Wave Vertical

SCALE or enable the touch screen to adjust

the vertical scale.

 Press ωc to set the lower limit frequency. For setting methods, refer to

descriptions in "Parameter Setting Method".