Loading ...
Loading ...
Loading ...
RIGOL Chapter 6 Operations and Measurements
6-42 MSO7000/DS7000 User's Guide
horizontally/vertically, the markers will track the points being marked at the last
adjustment of the cursors.
Note: When the delayed sweep function is enabled, the track cursor is within the
expanded area.
Press Mode to select "Track" to enable the cursor track function, and the
measurement results will be displayed at the upper-left corner of the screen, as
shown in the following figure. When you change the measurement parameter for the
track mode, the measurement results will be changed accordingly.
AX: indicates the X value at Cursor A.
AY: indicates the Y value at Cursor A.
BX: indicates the X value at Cursor B.
BY: indicates the Y value at Cursor B.
△X: indicates the horizontal spacing between Cursor A and Cursor B.
△Y: indicates the vertical spacing between Cursor A and Cursor B.
1/△X: indicates the reciprocal of the horizontal spacing between Cursor A and
Cursor B.
1. Select Measurement Source
Press CursorA, then rotate the multifunction knob to select the
desired measurement source. Press down the knob to select it. You can also
press CursorA continuously or enable the touch screen to select it. The
available source channels are None, CH1-CH4, and Math1-Math4.
Press CursorB, then rotate the multifunction knob to select the
desired source (CH1-CH4). Press down the knob to select it. You can also
press CursorB continuously or enable the touch screen to select it. Thea
available source channels are None, CH1-CH4, and Math1-Math4.
Note: Only channels currently enabled can be selected.
2. Select the Track Axis
Press Track to select "X" or "Y" as the current track axis. The default is "X".
X: tracks X Cursor and measures the value at X Cursor.
Y: tracks Y Cursor and measures the time of the first point at the left side of
the screen.
3. Adjust Cursor Position
Adjust Cursor A: Press CursorA and rotate the multifunction knob to
Loading ...
Loading ...
Loading ...