Loading ...
Loading ...
Loading ...
Miscellaneous—Operational Checkout
Continued on next page KR46761,0001414 -19-01AUG18-10/50
Monitor, Gauges, and
Battery Relay Checks
TX1160749A —UN—15MAY14
Default Screen
50.0
h
10:00
H
C
AM
AUTO
24.0
˚
C
FM
VOL
CH1
ST
MHz
81.3
ECO
0.00 gal/h
F
E
8
TX1160750 —UN—15MAY14
Engine Preheat Indicator
1— Work Mode Indicator
2— Aftertreatment Device Regeneration Inhibit Indicator
3— Power Mode Indicator
4— Hour Meter
5— Engine Coolant Temperature Gauge
6— Fuel Gauge
7— Travel Mode Indicator
8— Engine Preheat Indicator
11— Diesel Exhaust Fluid (DEF) Gauge
IMPORTANT: This machine is equipped with glow plugs. Glow plugs
are automatically controlled by the engine controller when the
key is turned ON. Do not start the engine until the engine preheat
indicator (8) disappears on the monitor. Indicator will not appear
if ambient air temperature is above 0°C (32°F).
NOTE: The aftertreatment device regeneration inhibit indicator (2) will display on
the monitor when the key switch is in ON position. Once the engine is
started, the indicator will disappear unless aftertreatment device regeneration
has been disabled by the operator through the monitor.
NOTE: If engine coolant temperature is below 30°C (86°F), engine
temperature gauge needle may not move.
4-2-6
112321
PN=286
Loading ...
Loading ...
Loading ...