Loading ...
Loading ...
Loading ...
Operation—Operating the Machine
KR46761,00013C7 -19-27AUG20-1/1
Inspect Machine Daily Before Starting
Perform daily maintenance checks. See
Maintenance—Every 10 Hours or Daily. (Section 3-4.)
•
Clean operator’s station (1), check pedals for freedom
of movement, and check re extinguisher (if equipped)
charge.
•
Inspect radiator and cooler cores (2) for obstructions.
•
Clean engine cover (3).
•
Inspect seat belt. See Inspect Seat Belt. (Section 4-1.)
•
Check fuel level. Remove fuel tank cap (4) and ll tank
with proper fuel (if necessary).
Inspect the following before starting:
ELECTRICAL SYSTEM: Check for worn or frayed wires
and loose or corroded connections.
HYDRAULIC SYSTEM: Check for leaks, missing or loose
clamps, kinked hoses, and lines or hoses that are making
contact with each other or other machine parts.
FUEL SYSTEM: Check for leaks, missing or loose clamps,
kinked hoses, and lines or hoses that are making contact
with each other or other machine parts. Drain water and
sediment from primary and auxiliary fuel lters.
HARDWARE: Check for loose or missing parts.
LUBRICATION: Check lubrication points on periodic
maintenance chart. See Service Machine at Specied
Intervals. (Section 3-2.)
SHEET METAL AND TRACKS: Check for bent, broken,
loose, or missing parts.
PROTECTIVE DEVICES: Inspect guards, shields,
roll-over protective structure (ROPS), and seat belt.
SAFETY: Walk around machine to be sure all persons are
away from machine area.
1
2
4
3
TX1278635 —UN—28MAY19
Machine Inspection
1— Operator’s Station
2— Radiator and Cooler Cores
3— Engine Cover
4— Fuel Tank Cap
WINDOWS: Inspect and clean the polycarbonate
windows. See Inspect and Clean Polycarbonate
Windows. (Section 4-1.)
2-3-2
112321
PN=153
Loading ...
Loading ...
Loading ...