Loading ...
Loading ...
Loading ...
Maintenance—Machine
KR46761,00011E2 -19-14NOV16-1/1
KR46761,0001409 -19-02NOV16-1/1
Cab Tilt Oil—Rear Entry Cab Only
IMPORTANT: Prevent damage to enclosure door and
cab tilt system. This machine is factory lled
with John Deere Hydrau™XR zinc-based oil.
Avoid servicing this machine with products
that do not meet these specications. If oils
have been mixed or if alternate service oils
are desired, the complete enclosure door
and cab tilt system needs to be completely
ushed by an authorized dealer.
Avoid machine damage. Mixing different oil
types can degrade lubricant and machine
performance. Oil manufacturers engineer
their oils to meet certain specications and
performance requirements.
The following oil is required:
•
John Deere Hydrau™XR
If John Deere Hydrau™ XR is not available, other oils
must meet the following requirements:
•
Brookeld viscosity at -40°C >9500 cP
•
VI 230-250
•
Oxidation stability per ASTM D943 <7000 hours
•
Denison HF-0
-40˚C
-30˚C
-20˚C
-10˚C
0˚C
10˚C
20˚C
30˚C
40˚C
50˚C
-40˚F
-22˚F
-4˚F
14˚F
32˚F
50˚F
68˚F
86˚F
104˚F
122˚F
JD HYDRAU XR
TX1228191 —UN—14NOV16
Oil Viscosities for Air Temperature Ranges
Hydrau is a trademark of Deere & Company
Track Adjuster, Working Tool Pivot, Swing
Bearing, and Swing Bearing Gear Grease
For working tool pivots and front attachments:
•
Use an Extreme Pressure (EP) grease with at least 3%
Moly content
For all other items:
•
Use an Extreme Pressure (EP) grease
Other greases may be used if they meet the following:
•
NLGI Performance Classication GC-LB
IMPORTANT: Some types of grease thickener are
not compatible with others.
TX1227552 —UN—02NOV16
Grease
3-1-11
112321
PN=189
Loading ...
Loading ...
Loading ...