Loading ...
Loading ...
Loading ...
Operation—Monitor Operation
KR46761,0001337 -19-02FEB17-8/31
KR46761,0001337 -19-02FEB17-9/31
KR46761,0001337 -19-02FEB17-10/31
KR46761,0001337 -19-02FEB17-11/31
Continued on next page KR46761,0001337 -19-02FEB17-12/31
• Engine Overheat Alarm—Engine coolant temperature
has abnormally increased. Stop operation. Run the engine
at slow idle speed or lower the coolant temperature.
TX1086350 —UN—06JAN11
Engine Overheat Alarm
• Warning Alarm—An abnormal condition has been
detected. Alarm is either red or yellow depending on
severity of problem. Contact an authorized Hitachi dealer.
TX1086352 —UN—06JAN11
Warning Alarm
• Programming Alarm—If this Service ADVISOR™
Remote (SAR) programming alarm appears on the
monitor, different conditions may exist depending on the
color. If this alarm is:
•
YELLOW—Service ADVISOR™ Remote (SAR)
software update is ready to install.
•
RED—SAR programming is in process. Do not turn
OFF machine power until programming is complete.
TX1087187 —UN—21JAN11
Programming Alarm
•
GREEN—SAR programming is complete. Cycle
machine power to complete the process.
Service ADVISOR is a trademark of Deere & Company
• Program Failure Alarm—This alarm will appear along
with a red warning alarm. A problem occurred during
the Service ADVISOR™ Remote (SAR) programming
process. Contact an authorized Hitachi dealer.
TX1087189 —UN—21JAN11
Program Failure Alarm
• Unable to Program Alarm—This alarm will appear
along with a yellow warning alarm. A condition exists that
will not allow the transfer of new Service ADVISOR™
Remote (SAR) software to happen. Retry programming or
contact an authorized Hitachi dealer.
TX1087190 —UN—21JAN11
Unable to Program Alarm
2-2-9
112321
PN=132
Loading ...
Loading ...
Loading ...