Loading ...
Loading ...
Loading ...
Operation—Operating the Machine
KR46761,000115E -19-12APR16-1/1
Parking the Machine
IMPORTANT: During freezing weather, prevent
damage to undercarriage components from
frozen mud and dirt. Machine must be
parked on a solid, level surface to prevent
tracks freezing in the ground.
1. Park machine on a solid, level surface.
During freezing weather, clean mud and dirt from
tracks, rollers, and track frames. Clean the steps and
walkways after parking the machine.
If tracks are frozen in the ground, slowly raise the
machine using boom to free the tracks. Move machine
carefully.
2. Lower equipment to the ground.
3. Turn auto-idle switch (1) to the A/I OFF position.
IMPORTANT: Turbocharger can be damaged
if procedure to shut down engine is
not done properly.
4. Run engine with engine speed dial (2) at 1/3 position
without load for 2 minutes.
5. Turn engine speed dial to slow idle position.
6. Turn key switch (3) to the OFF position. Remove key
from switch.
7. Place pilot shutoff lever (4) to locked (UP) position.
IMPORTANT: Prevent cab electrical component
damage from bad weather. Windows, roof
vent, and cab door must be closed to
prevent rain from entering.
8. Close windows, roof vent, and cab door.
9. If machine is to be parked overnight, turn battery
disconnect switch to OFF position. See Battery
Disconnect Switch in this section.
If storing longer than overnight, see
Miscellaneous—Storage. (Section 4-4.)
10. Lock all access doors and compartments.
TX1087012A —UN—18JAN11
Switch Panel
4
TX1214198 —UN—12APR16
Pilot Shutoff Lever (unlocked position shown)
1— Auto-Idle Switch
2— Engine Speed Dial
3— Key Switch
4— Pilot Shutoff Lever
2-3-23
112321
PN=174
Loading ...
Loading ...
Loading ...