Loading ...
Loading ...
Loading ...
Miscellaneous—Operational Checkout
Continued on next page KR46761,0001414 -19-01AUG18-9/50
Monitor Start-Up Check
TX1188838A —UN—26MAR15
System Starting Screen
TX1160713A —UN—15MAY14
Default Screen
1— System Starting Screen
2— Default Screen
NOTE: The aftertreatment device regeneration inhibit indicator will display on the
monitor when the key switch is in ON position. Once the engine is started,
the indicator will disappear unless aftertreatment device auto regeneration
has been disabled by the operator through the monitor.
When the key switch is turned to the ON position, the system starting screen (1)
displays for approximately 2 seconds and then the default screen (2) is displayed.
Turn key switch to ON position. YES: Go to next check.
LOOK: Does monitor display system starting screen? NO: Check monitor 5 A
fuse (marked MONITOR)
(F14). See Replacing
Fuses. (Section 4-1.)
LOOK: Does default screen with hour meter appear after system starting screen
disappears?
IF OK: See an authorized
Hitachi dealer.
4-2-5
112321
PN=285
Loading ...
Loading ...
Loading ...