Loading ...
Loading ...
Loading ...
Operation—Operating the Machine
KR46761,000147D -19-21DEC16-1/1
Lifting
NOTE: This procedure is only applicable to machines
equipped with a bucket.
CAUTION: Prevent possible injury when lifting.
Observe these rules when lifting machine:
•
Never move a load over a bystander’s head.
•
Never use machine to lift people.
•
Keep everyone clear of raised loads.
•
Do not exceed lift capacity limits.
•
Never attach sling or chain to bucket teeth.
•
Use tether lines to guide loads.
•
Use hand signals to communicate with others.
•
Never move load suddenly.
•
Keep all bystanders away from raised load
until blocks are supporting it or load is
sitting on the ground.
For more information on lifting, see Object Handling.
(Section 1-3.)
For more information on lift capacity limits, see
Miscellaneous—Specications.
1. Use proper rigging to attach and stabilize loads.
2. Without bucket loop: Curl bucket and retract arm.
Fasten sling or chain to bucket pivot pin (1).
With bucket loop: Curl bucket and retract arm. Fasten
sling or chain to bucket loop (2).
3. Coordinate hand signals with signal person before
starting.
4. Know location of all bystanders in working area.
5. Attach a hand line to load and make sure person
holding hand line is away from load.
6. Check stability by carefully doing a trial lift:
•
Park machine close to load.
•
Attach load to machine.
•
Raise load 50 mm (2 in) above ground.
•
Swing load all the way to one side.
•
While keeping load close to ground, move load away
from machine.
TX1144511 —UN—24OCT13
Without Bucket Loop
TX1144666 —UN—24OCT13
With Bucket Loop
1— Bucket Pivot Pin 2— Bucket Loop
•
If there is any indication of reduced stability of
machine, lower load to ground.
7. Lift load only as high as necessary.
2-3-21
112321
PN=172
Loading ...
Loading ...
Loading ...