Loading ...
Loading ...
Loading ...
Maintenance—Every 10 Hours or Daily
KR46761,00013AB -19-01DEC16-1/1
KR46761,00013AC -19-18OCT16-1/1
Drain Water and Sediment From Fuel Tank
Sump
1. Park machine on a level surface. Rotate
upperstructure 90° for easier access.
IMPORTANT: Turbocharger can be damaged
if procedure to shut down engine is
not done properly.
2. Run engine at slow idle speed without load for 5
minutes.
3. Stop engine.
4. Remove fuel tank ll cap.
5. Open right rear service door to access drain valve (1)
for the fuel tank.
6. Open drain valve for several seconds to drain water
and sediment into a suitable container. Dispose of
waste properly. Close drain valve.
TX1224475 —UN—26SEP16
Drain Valve
1— Drain Valve
7. Close service door and install fuel tank ll cap.
Drain Primary Fuel Filter and Water Separator
1. Open right rear service door to access primary fuel
lter and water separator (1).
2. Open drain valve (2) to extract water from fuel system.
Drain uid until water and sediment are removed into
suitable container. Dispose of waste properly.
3. Close drain valve.
4. Prime fuel system and bleed air. See Bleed Fuel
System. (Section 4-1.)
5. Close service door.
1— Primary Fuel Filter and
Water Separator
2— Drain Valve
TX1224477 —UN—13OCT16
Primary Fuel Filter and Water Separator
3-4-6
112321
PN=221
Loading ...
Loading ...
Loading ...