Loading ...
Loading ...
Loading ...
Maintenance—Every 4000 Hours
Continued on next page KR46761,00013DC -19-21DEC16-3/4
Flush Cooling System
IMPORTANT: To prevent engine damage:
•
Do not pour coolant into a hot engine.
•
Do not operate engine without coolant.
1. Fill cooling system with clean water.
2. Install surge tank cap (1).
3. Start and run engine until engine reaches operating
temperature.
4. Stop engine.
CAUTION: Prevent burns from hot ushing
solution. Avoid skin contact with
ushing solution.
5. Drain cooling system immediately before rust and
dirt settle. Slowly remove surge tank cap and open
radiator drain valve (4). Allow ushing solution to drain
into suitable container. Dispose of waste properly.
6. Close drain valve and install access cover and cap
screws.
1— Surge Tank Cap
4— Drain Valve
TS281 —UN—15APR13
Pressurized Fluids
TX1226278 —UN—17OCT16
Surge Tank
TX1226292 —UN—17OCT16
Drain Valve (view from under machine)
3-13-3
112321
PN=253
Loading ...
Loading ...
Loading ...