Loading ...
Loading ...
Loading ...
Maintenance—Machine
KR46761,00013EE -19-26OCT16-1/1
KR46761,00013EF -19-26OCT16-1/1
TX,FUEL,SPECS -19-26OCT20-1/1
KR46761,00013F0 -19-26OCT16-1/1
Required Emission-Related Information
Service Provider
A qualied repair shop or person of the owner's choosing may maintain, replace, or repair emission control devices and systems with original
or equivalent replacement parts. However, warranty, recall, and all other services paid for by Hitachi must be performed at an authorized
Hitachi service center.
Diesel Fuel
Consult a local fuel distributor for properties of the diesel
fuel available in the area.
In general, diesel fuels are blended to satisfy the low
temperature requirements of the geographical area in
which they are marketed.
Diesel fuels specied to EN 590 or ASTM D975 are
recommended. Renewable diesel fuel produced by
hydrotreating animal fats and vegetable oils is basically
identical to petroleum diesel fuel. Renewable diesel fuel
that meets EN 590 or ASTM D975 is acceptable for use
at indicated mixture levels.
Sulfur Content for Engines That Meet Final Tier
4 and Stage IV Engines
•
Use ONLY ultra low sulfur diesel (ULSD) fuel with a
maximum of 15 mg/kg (15 ppm) sulfur content.
IMPORTANT: Do not mix used diesel engine oil or any
other type of lubricating oil with diesel fuel.
Improper fuel additive usage may cause damage
on fuel injection equipment of diesel engines.
Diesel Fuel Specications
The engine in this machine is designed to operate only
with ultra low sulfur diesel (ULSD) fuel. Use of fuel
other than ULSD will reduce the efciency and durability
of the engine, will harm and permanently damage the
engine’s advanced emissions control systems, reduce
fuel economy, and possibly prevent the engine from
running at all. Emission-related warranties are likely to
be rendered void by the use of fuel that does not meet
these specications.
Lubricity of Diesel Fuel
Most diesel fuels manufactured in the United States,
Canada, and the European Union have adequate lubricity
to ensure proper operation and durability of fuel injection
system components. However, diesel fuels manufactured
in some areas of the world may lack the necessary lubricity.
IMPORTANT: Make sure the diesel fuel used
in your machine demonstrates good
lubricity characteristics.
If fuel of low or unknown lubricity is used, add John Deere
Fuel-Protect Diesel Fuel Conditioner (or equivalent) at
the specied concentration.
Lubricity of BioDiesel Fuel
Fuel lubricity can improve signicantly with BioDiesel
blends up to B5 (5% BioDiesel).
3-1-1
112321
PN=179
Loading ...
Loading ...
Loading ...