Siglent SDS-2000X-LA Manual

Loading ...

SIGLENT

SDS2000X User Manual 59

Note: Press the Auto Setup button will set the trigger type to Edge and slope to rising.

Edge Trigger

Edge trigger distinguishes the trigger points by seeking the specified edge (rising, falling,

rising & falling) and trigger level.

Rising Edge Falling Edge

Trigger Level

Trigger Point Trigger Point

1. Press the Setup button on the front panel to enter the Trigger system function menu.

2. Press the Type softkey; turn the Universal Knob to set select Edge and then push

the knob to confirm.

3. Press the Source softkey; turn the Universal Knob to select CH1, CH2, CH3, CH4,

EXT, EXT/5 or AC Line as the trigger source.

4. Press the Slope softkey; turn the Universal Knob to select the desired trigger edge

(rising, falling or rising & falling), and then press down the knob to confirm. The current

trigger slope is displayed at the upper right corner of the screen.

5. Turn the Trigger Level Knob to adjust the trigger level to obtain stable trigger.

Figure 24: Edge Trigger

Loading ...

Siglent SDS-2000X-LA MSO Function Software for SDS2000X Series Oscilloscopes