Loading ...
Loading ...
Loading ...
SIGLENT
SDS2000X User Manual 95
Figure 48: BUS CONFIG Menu
10. Press Baud softkey to set the baud rate.
The baud rate can be set as predefined value.
If the desired baud rate is not listed, press Baud and select custom option,
press the Custom and turn the Universal Knob to set the desired baud rate.
11. Press Parity Check softkey to set the type of parity check (Even, Odd or None).
12. Press Stop Bit softkey to set the length of stop bit (1, 1.5 or 2 bits).
13. Press Idle Level softkey to set the idle level (LOW or HIGH).
14. Press Next Page softkey.
15. Press Data Length softkey and set byte bits (5-8) by the Universal Knob.
Loading ...
Loading ...
Loading ...