Loading ...
Loading ...
Loading ...
SIGLENT
152 SDS2000X User Manual
Note: To delete a setup file in memory, please save a new setup to the same location to
overwrite it.
Internal Save and Recall
Internal save and recall support Setups in Save/Recall. In the following part, the save and
recall method and procedures are introduced.
Save the specified oscilloscope setting in internal memory.
1. Connect the signal to the oscilloscope and obtain stable display.
2. Press Save/Recall button on the front panel to enter the SAVE/RECALL function
menu.
3. Press the Save softkey to enter the SAVE function menu.
4. Press the Type softkey and then turn the Universal Knob to select Setups; and
then press the knob to confirm.
5. Press the Save To softkey to select Internal to save the current setup of the
oscilloscope to the internal memory.
6. Press the Setup softkey button,and then turn the Universal Knob to select the
location to save. The internal memory can save as many as 20 setup files, from
No.1～No.20.
7. Press the Save softkey to save the current setup to the appointed location. After a
few seconds, it will pop-out the message “Store Data success!”
Load the specified type of file in internal memory.
If want to recall the setup after having finished the steps above, please do the
following steps:
1. Return to the SAVE/RECALL function menu.
2. Press the Recall softkey to enter the RECALL function menu.
3. Press the Setup softkey, and then turn the Universal Knob to select the location
that you want to recall, press the Recall softkey to recall the setup, and it will
pop-out the message “Read Data Success!”
Loading ...
Loading ...
Loading ...