Loading ...
Loading ...
Loading ...
The ISO speed cannot be set for movie recording.
ISO speed is set automatically in [ ] recording mode. In [ ] mode, you can manually
set the ISO speed ( ).
The minimum speed in the ISO speed range is ISO 200 when [ : Highlight tone
priority] is set to [Enable] or [Enhanced].
Expanded ISO speeds cannot be selected for movie recording.
Set [ : ISO expansion] to [Enable] ( ).
Check the [ISO speed] setting in [ : ISO speed settings].
Expanded ISO speeds are not available when [ : Highlight tone priority] is set to
[Enable] or [Enhanced].
The exposure changes during movie recording.
If you change the shutter speed or aperture value during movie recording, the changes
in the exposure may be recorded.
Recording a few test movies is recommended if you intend to perform zooming during
movie recording. Zooming as you record movies may cause exposure changes or lens
sounds to be recorded, or loss of focus.
The image flickers or horizontal stripes appear during movie recording.
Flickering, horizontal stripes (noise), or irregular exposures can be caused by
fluorescent lighting, LED lighting, or other light sources during movie recording. Also,
changes in the exposure (brightness) or color tone may be recorded. In [
] mode,
using a slower shutter speed may reduce the problem. The problem may be more
noticeable in time-lapse movie recording.
766
Loading ...
Loading ...
Loading ...