Loading ...
Loading ...
Loading ...
6
OPERATING INSTRUCTIONS
1. Remove bread pan from baking chamber by grasping the handle
(see figure 1a), turning the pan counterclockwise, and lifting up.
It may be helpful to first lift the handle of the bread pan by using
the pan hook. To properly attach the kneading paddle, insert onto
shaft with wide base facing down (see figure 1b).
2. Properly measure all ingredients and put into the bread pan in the
exact order they are listed. Always put the liquids in first, the dry
ingredients in next, and the yeast last. Yeast should not touch wet
ingredients. Please refer to page 13 for detailed instructions.
3. Insert the bread pan back into the baking chamber, turning clockwise
to lock in place.
4. If the Automatic Mix-In Dispenser is being used, pull out the
dispenser compartment from the unit, then add mix-ins before placing
back in the unit.
Please refer to the Automatic Mix-In Dispenser section (page 7) for
more instructions.
5. Close the lid and connect the power cord to a standard electrical outlet.
6. Select your program by pressing the MENU button. For more
information on each program, see pages 9–11.
7. Select your crust color (light, medium, or dark) by pressing the
CRUST COLOR button. If no crust color is selected, the unit will
automatically default to medium crust color.
8. Select your loaf size (1 lb., 1½ lb., or 2 lb.) by pressing the LOAF SIZE
button. If no loaf size is selected, the unit will automatically default to
a 1½-lb. loaf.
9. If you would like the bread-making process to start immediately,
first press the CONFIRM button to confirm your selected settings.
The indicator light on the START/STOP/PAUSE button will be flashing,
indicating your selection has been confirmed. Next press the
START/STOP/PAUSE button to start the program. The indicator light
will stay solid to show that the bread maker is on.
NOTE: The indicator light must be flashing before you can press the
START/STOP/PAUSE button to start the program. If it is not flashing,
press the CONFIRM button again.
10. For additional setting options and info on the Automatic Mix-in Dispenser,
Custom Memory, Delay Start Timer, and Sound On/Off, see pages 7–8.
11. To pause the process at any time, press the START/STOP/PAUSE
button. To resume the process, first press the Confirm button, then
press START/STOP/PAUSE. To cancel the process at any time, press
and hold the START/STOP/PAUSE button for 3 seconds.
1a.
1b.
Loading ...
Loading ...
Loading ...