Loading ...
Loading ...
Loading ...
General Specifications
Color Standard: 525 line NTSC Color
Chassis: CTC169, solid state, unitized
PowerRequirements: 120VAC + 10%,60Hz
PowerConsumption: 195W maximum
Remote Control
Model: CRK62D andCRK60A
Transmissionsystem: Digitallyencodedinfraredlight
Batteries: CRK62D: 4 AAA Size
CRK60A: 2 AAA Size
Battery Life: One Year in Normal Use
Power Cord Type syr 2
RF Specifications
Tuning System Type:
Quartz-controlled
Multiband Frequency Synthesis
Band Coverage: VI-IF channels 2-6, 7-13
UHF Channels 14-69
EIA Cable Channels 1-125
Complete chart is on page 45.
Frequency Coverage: 54-806 MI-Iz
Tuner Type: Solid State
Channel Access: Programmable Scan Up/Down
Direct Access With Remote
Channel Indication: On-Screen
Antenna Inputs: Two 75-ohm VHFFUHF combined inputs
Sensitivity: 15ttV VHF, 30_tV UHF
Video Specifications
HorizontalLuminance up to560 Lines(from s-vioeo input)
Resolution: usingwideband videosource
Black toWhite RiseTime 75ns
Luminance Bandwidth: 8.75Ml-Iz(from S-V,OEOinput)
Video Input: 1Vp-p; 75 ohms; negativesync
Video Output: 1Vp-p; 75 ohms; negativesync
HV @ Zero Beam current: 27.5kV Nominal
Audio Specifications
Frequency Response: 50-20,000 Hz (at rated output)
Stereo System: MTS Stereo with SAP (Second
Audio Program)
Stereo/MonoSwitching: Automatic
Expanded Stereo: Switchable
Audio Input: 450 mV RMS typical,1 V RMS maximum
Audio Input Greaterthan50 kOhms (Stereo);
Impedance: Greaterthan25 kOhms (Mono)
Audio Power: 10 watts/channelRMS into8 ohms
withlessthan1% THD
Audio Output:
Selected Outputs:
Outputs To Hi-Fi:
Output Impedance:
Speaker Type:
(2-way)
Speaker Impedance:
L
Output level tracks inputs within +l/-2dB
2 V RMS maximum, controlled by
volume, mute, equalizer, andbalance
Surroundand Hi-Fi outputs less
than2,500 ohms
Two 21/4" x 5" Mid/High Drivers
Two 130mm Enclosed Woofers
Internal, 8 ohms (nominal)
External, 8 ohms
The ProScan NoGlare TM picture tube has a special lithium
silicate faceplate that reduces glare. It also includes an
anti-static coating to help prevent dust buildup, so the
screen will require much less dusting than conventional
"IV screens.
You can clean the TV as required, using a soft cloth or the
dusting attachment for your vacuum cleaner. Be sure to
occasionally vacuum the ventilation slots in the cabinet to
help assure adequate ventilation,
To clean the faceplate (screen) of the picture tube, use a
nonabrasive glass cleaner like Windex brand or Glass Plus
brand, with a soft cloth. Oily foods like peanut butter can
be effectively cleaned from the faceplate with glass
cleaners.
Do not use furniture polish on the TV cabinet or faceplate
of the picture tube. Because texturedfinishes are porous,
using furniture polish could mar their appearance. They
can be easily cleaned with a damp, soft cloth. Furniture
polish is probably the most difficult material to clean off a
picture tube under normal conditions. To remove furniture
polish from the TV screen, use 100% isopropyl alcohol (a
component in most glass cleaners) with-a soft cloth.
While cleaning, do not allow liquid to run down the screen
and inside the instrument. Also avoid placing drinks or
vases with water on top of your TV.
When turning the set on after cleaning the faceplate, there
may be some rainbow effects if the screen is not
completely dry.
I features and specifications are subject to change without notice.
Loading ...
Loading ...
Loading ...