Loading ...
Loading ...
Loading ...
VCR Channel Setup
The vCR1 CHANfunction lets you program to which channel
the TV will automatically tune when you press the vcm
button on the remote. This is handy if you connect a VCR
to your TV. You will no longer have to remember to which
input jacks the VCR is connected because the TV will
remember for you.
For example, if you connect a VCR's AUDIONIDEO ouTjacks
to the TV's INPUTOjacks (as shown on page 46), you will
no longer have to remember to sdect channel 91 on the TV
to see what the VCR is playing. By entering channel 91
next to the VCR1CHANfunction, the TV will automatically
tune to channel 91 each time you press the vcal button on
the remote.
This function is especially convenient if you have a
compatible VCR that can be operated by the VCR1button on
the remote. Pressing vcm will then not only turn on the
VCR but also automatically tune the TV to the proper
channel for viewing the picture from the VCR. You can
program most brands of remote-controllable VCRs to
respond to the vcal button as described on page 31.
The VCR2 CHANfunction works the same way. It lets you
program to which channel the TV will automatically tune
when you press the VCR2button on the remote. You can
program most brands of remote-controllable VCRs to
respond to the VCR2button as described on page 31.
Pressing the VCR2button will then not only turn on the
VCR but also automatically tune the TV to the proper
channel for viewing the picture from the VCR.
Setting UpVCR Channels
with or without remote
1 Repeatedly press the MENUbutton to select SETUP MENUand
then press + to display the setup functions.
2 Repeatedly press MENUto select the VCR1 CHANfunction.
26
Enter the channel number you
want to program by pressing
two number buttons on the
remote control. (The channel
number you enter is the channel
to which the TV will tune
automatically when you later press the VCR1button on the
remote.) See the notes below if you are not sure about which
channel number to enter.
Press the + button to program
the channel number you selected
into the TV's memory.
Note: Pressing the - button here
will turn off this feature and display
VCR 1 CHAN: OFF again.
If you have another VCR
connected to the TV, press MENU
to select the VCR 2 CHAN function.
6
Enter the channel number you
want to program by pressing two
number buttons on the remote
control. (This is the channel
number to which the TV will tune
automatically when you later
press the VCR2button on the remote). See the notes below if
you are not sure about which channel number to enter.
Press the + button to program
the channel number you
selected into the VCR2 CHAN
function memory.
Note: Pressing the - button here
will turn off this feature and display
VCR 2 CHAN: OFF again.
Notes about Entering Channel Number:
• Enter channel 91 if your VCR is connected to the TV's audio and video
INPUT 1jacks.
• Enter channel 92 if your VCR is connected to the TV's audio and video
_NPUT2 jacks.
• Enter channel 90 if you have a Super-VHS VCR that is connected to
the TV's S-VIDEOconnector and INPUT t audio jacks (labeled L and
R/MONO).
• Enter channel 03 (or 04) if you did not use any audio/video cables and
connected the VCR to the TV's round antenna connector labeled
CABLE/ANTENNA.Enter the same channel number (03 or 04) as the
position of the VCRs CH3/CH4switch. This is the channel to which you
must tune your TV for viewing signals from your VCR.
, Refer to pages 46-47 if you want to review details about connecting
your VCR to your TV.
-,<F---
Loading ...
Loading ...
Loading ...