Loading ...
Loading ...
Loading ...
TIMEANDCHANNELNUMBERDISPLAYSshow the current time
(once set) and channel number whenever you turn on the TV,
change channels, or press the remote's OISPL.AYbutton. These
displays also appearwhenever you change volume with the
VOLUMEbuttons on the front of the TV.
10:23Am 13
/
REMOTECONTROLSENSORreceivescommandsfrom the
remote control. When using the remote control, point it
toward this sensor.
POWERINDICATORlights whenever the TV is turned on.
VOLUMEBUTTONS
PressVOLUMEup tOincreasevolume, or pressVOLUMEdown
to decrease volume. The vohmae display will automatically
appear on the screen when yc,u press the VOLUMEbuttons.
POWERBUTTON
Pressonce to turnon "IV. Pressagainto turnoff TV.
I
/
/
/
/
/
/
STEREOHEADPHONEJACKlets you connect an optional
headphone to enjoy private listening without disturbing
others. If the plug on your headphones does not fit this jack,
adapters are available from your local electronics supply
store.
Plugging in headphones will not automatically mute the sound
from the TV. This special feature enables someone with a
hearing impairment to attach a set of headphones with
separate volume control and enjoy a program with others in
the same room listening at a lower volume. You can also
enjoy private listening if desired. Here's how to completely
mute the sound except for what's coming through the
headphones.
1 Change the SPEAKERS:ON/OFFfunction tO the OFF setting as
described on page I1.
2 If an optional amplifier is connected to the TV, turn off the
amplifier to prevent sound from coming through it.
3 Change the SURROUND:OFF/DOLBY/MATRIX/HALLJSTADIUM
function to the OFFsetting if you have optional speakers
connected to the TV's SURROUNDSPEAKERSterminals.
Repeatedly press the SURROUNDbutton to change the set-
ting.
CHANNELBUTTONS
PressCHANNEL ^ tOSeethe next higher channelin memory,or
press CHANNEL V tOsee the next lower channel in memory.
Your TV will automatically program channels into the chan-
nel memory for you when you start the AUTOPROGRAMfeature.
You can also add or erase individual channels as desired as
described on page 24.
MENUBUTTON
Press MENU repeatedly until 'Ihe menu you want to display is
selected, then press + or -. Next press MENUrepeatedly to
select the function you want to adjust and then press + or - to
adjust the setting. Details about using each function begin on
page 10.
-- - AND+ BuTr0NS
Use these buttons after you iaave pressed the MENUbutton to
enter or adjust functions.
J
Loading ...
Loading ...
Loading ...