Loading ...
Loading ...
Loading ...
Follow one of the steps below to connect an indoor or outdoor antenna to your TV if you do not have a cable-TV system.
A. if your home antenna cable is a 75-ohm, round, coaxial cable that carries only VHF (channels 2-13),
only UHF (channels 14-69), or VHF and UHF channels, connect it to your set like this:
Incoming Cable __
hum Home
Antenna
BackdTV
CABLEI ANTENNA
ANTA
-0
ANI'B
CON_RTER
B, If your home antenna cable is a 300-ohm, flat, twin-lead cable that carries only VHF (channels 2-13),
only UHF (channels 14-69), or VHF and UHF channels, connect it to your set like this:
Incoming Cable
hwn Home
Antenna
jAdapter(supplied)
(suchus_S3ge3)"
Push on
6ackofTV
C_LE I ANTENHA
ANT A
ANTB
CONVERTER
C. If your home antenna cable(s) are a 75-ohm, round, coaxial cable that carries VHF (channels 2-13) and a 300-ohm, flat, twin-
lead cable for UHF (channels 14-69), connect it to your set like this:
Incoming
Cables ITom
Home
Antenna(s)
SackofTY
UflF "--- _ ANT A
and _
VHF _ \ (such es 11975511" _6
CONVERTER
D° if the antenna cables coming from your home antenna(s) are two 300-ohm, flat, twin-lead cables as shown here, connect
them to your set like this:
Incoming
Cablesfrom
Home
Antenna(s)
BackofTV
UHF "_" _ _ Pushon .,a_
and ANTB
VHF
Antenna Mixer CONVERTER
(suchas#193984)*
*Optional accessory available from your dealer or electronics supply store.
Mail order form is on page 35.
Note: Be sure to connect the UHF antenna cable to the
UHF screws on the Antenna Mixer and the VHF antenna
cable to the screws marked VHF.
41
Loading ...
Loading ...
Loading ...