Loading ...
Loading ...
Loading ...
If your cable box has its own remote to change channels,
you will probably be able to program the TV's remote to
control both the TV and the cable box.
The TV's remote is designed to control several brands of
q-able boxes. To program the remote, just press CABLE,then
Io, then the two-digit code number for your brand of cable
box. Refer to the chart below to find the code number for
'.your cable box. Press the OFF/ONbutton next to confirm
operation. You may need to try each of the code numbers
listed until you find the one that works.
1 PRESSCABLE
4
TOTEST
3 PRESSTWO
NUMBER BUTTONS
(see list below)
PRESSID
Anvision 07, 08
Cablestar 07,
Eagle
Eastern International
General Instrument 04, 05, 15, 23, 24, 25, 30,
Hamlin 12, 13,
37,
04, 05, 15, 23, 24, 25, 30,
37,
07, 08, 19, 26, 28, 29, 32, 33, 40,
Hitachi
Jerrold
MACOM
Magnavox
NSC
Oak
Oak Sigma
Panasonic
Philips
Pioneer
Randtek
RCA
Regal
Regency
O8
O8
02
36
34
43
36
43
41
O9
01, 16, 38
16
27, 39
07, 08, 19, 26, 28, 29, 32, 33, 40, 41
18,20
07, 08
27
12, 13
02
03, 22
11
06
10, 11
17, 21
31
Scientific Atlantia
S_lvania
Teknika
Texscan
Tocom
Unika
Viewstar 07, 08, 19, 26, 28, 29, 32, 33, 40, 41
Zenith 14, 42
Note: Refer to the information sheet packed with your remote control
for the latest list of brand names and code numbers. Because this list is
constantly growing, the information sheet packed with your remote
control may be a later version of this list and contain additional brands
and/or code numbers.
After the TV's remote is programmed, you'l,l be able to
turn on the cable box by pressing CABLEthen OFF/ON.You
can change channels on the cable box by pressing the
CHANNELbuttons whenever the remote is in the "cable"
mode. To put the remote in the "cable mode", press the
CABLEbutton. Press the rv button to put the :remoteback
into the TV mode so the remote buttons will control the
TV again.
ProgrammingRemoteTo ControlCable Box
with remote only
Refer to the chart at the left to find the code number that
corresponds to the brand name of your cable box. Keep
this number in mind. If more than one number is listed,
you may need to try each one separately until you find the
one that works.
1 Press CABLEbutton on remote.
2 Press IDbutton on remote.
Press two numberbuttons (first one, then the other) to enter
the code number for your brand of cable box.
Note: You mustpress thetwo numberbuttonswithinthree seconds
of pressingtheIDbutton.
Point the remote at the cable box and press the OFF/ON button
to test the code number.
• If the fight number was entered, the cable box should turn
on. Pressing the CHANNELbuttons should then also change
channels on the cable box.
• If the cable box does not react to the remote (or if the remote
turns on the cable box but does not change channels), repeat
steps 1 thrn 5 with another code number.
Operating Notes: After the remote is programmed,it will turnon
the cable box whenever you press CABLEand then OFF/ON.
To turn off the cable box, press CABLE,then OFF/ON.
To changechannelsonthe cablebox, pressCABLEthell CHANNEL
up or down.
Loading ...
Loading ...
Loading ...