Loading ...
Loading ...
Loading ...
StandardVHS VCR(Not S-VHS)
These connections allow you to record TV programs and play
back tapes. For picture-in-picture viewing, use the preferred
method.
2-Way SignalSplitter**
eL ill 1111_
IncomingCable
FromAntenna or CIblI-TV System
Preferred Method
Shown here is the preferred method of connecting a VCR
to your TV if you are in an area with good signal reception.
This method uses a 2-way signal splitter to run separate
signals to the VCR and TV. This way you can view either
TV programs or VCR tapes and not be concerned about the
position of the VCR's rV/VCRswitch. If your cable
company requires a decoder box for premium channels,
refer to page 43.
Note: The audio/video connections from the VCR to the 'IV are
required for picture-in-picture viewing and for you to watch tapes being
played by the VCR.
Operation: If the VCR is connected to INPUT1jacks as
shown, select TV channel 91 to view whatever the VCR is
playing.
PreferredMethod
CoaxialAntennaCables"
I lsuchas AHO37Gor AH065G**)
J _ hck ot VCR
INFROMANT
VIDEO AUDIO
OUT
EkJdW
IlL
** These optional accessories (one AH047-2-way splitter, two AH065G-
antenna cables with push-on ends, and one AH077G-triple audio/video
cable) are available as a kit under number AVH500.
If you connect a second audio/video device to INPUT 2, select
TV channel 92 to view whatever the second device is playing.
Note: You can program your TV to automatically select the properVCR
input channel (91 or 92) when you press the VCR1or VCR2button.
Details are on page 26.
SimplifiedMethod
:Shown here is a simplified method of
connecting a VCR to your "IV. This method is
best for areas with poor signal reception. If
your cable company requires a decoder box
for premium channels, refer to page 43.
Note: The audio/video connections from the VCR to the
TV are optional; however, these additional connections
usually produce a better-quality picture during VCR
playback. These connections are required, however, for
picture-in-picture viewing and for stereo playback from
stereo VCRs.
Operation: If the VCR is connected to INPUT1
jacks as shown, select TV channel 91 to view
whatever the VCR is playing.
If you connect a second audio/video device to
INPUT2, select TV channel 92 to view whatever
the second device is playing.
I I I
Incoming Cable
Coaxial Antenna
Cables*
(such as #AN037}
SimplifiedMethod
6wk OfTV
AUDIO SELECTED
Hi-R
<@ @!<@
Back of VCR
S-VIDEO *
®
Audio/Video Cables*
(such as AHO69G)
*Optional accessories are available from most dealers and
electronics supply stores. Mail order form is on page 35.
Loading ...
Loading ...
Loading ...