Loading ...
Loading ...
Loading ...
l
Audio/_deo Input Cable
{UsuallysupplJodwilh
/
AV IN Jack camcorder)
(Audio/Video In)
Audio
I
VIDEO
r_NVERrER 1 2 _
S-VHS orStandard VHS Camcorder
This connection allows you to record onto the camcorder
whatever is currently being displayed on the TV screen.
You'll also be able to record signals from a VCR (or
similar device) that is connected to the TV's INPUT1 or
INPUT 2 jacks.
The TV must remain turned on during recording. If you
change channels on the TV, the channel change will be
recorded on the camcorder tape unless you pause the
(:amcorder during recording.
You may also want to use this connection to dub or edit
'V'CR tapes with two or three camcorders (or VCRs). By
connecting one camcorder (or VCR) to the INPUT1jacks
and another camcorder (or VCR) to the iNPUT2 jacks, you'll
be able to selectively edit and record whatever is playing
on the TV screen onto a third camcorder connected as
_;hown here to the SELECTOUTjacks.
If you connect a surveillance system to your monitor, you'll
be able to record what the camcorder is displaying on the
TV screen by connecting another camcorder (or VCR ) to
the SELECTOUTjacks as shown here.
To see the signal from a device connected to the INPUT1
jacks, select channel 91. Select channel 92 to see the signal
from a device connected to the INPUT2 jacks.
Note: Signals from the S-VIDEOconnector do not come thin the SELECT
OUTVIDEOjack. To record from an S-VHScomponent, remember to also
connect its regular video cable to the VIDEOiNPUT1jack and then tune to
channel 91.
The small inset picture from the picture-in-picture feature and any menus
(video, audio, or setup) or displays such as clock and channel that are on
the screen can not be recorded.
49
Loading ...
Loading ...
Loading ...