Loading ...
Loading ...
Loading ...
% Repeatedly
pressMENU to
select SETUP
MENU.
2. Then press+ or-to
display the setupmenu.
3. Repeatedlypress
MENU to select a
function,then press +
or-to adjust iL
MENU
Pressing MENUmoves down the screen (one item per
press). The setup menu will automatically disappear from
the screen if you do not press + or - within a few seconds.
Via remote control, your TV will "remember" which
function you displayed last, even after the menu has
disappeared from the screen. So, if you want to adjust the
same function again, simply press the + or - button on the
remote control. The last function you adjusted will
reappear on the TV screen.
The PARENTALCONTROLfeature lets you lock out any channels that
you don't want your children to watch. Pressing + or - switches
this function from OFF to ON. When this function is set to ON,
channels that have been locked out with the CHANCTRLfunction
cannot be viewed. When this function is set to OFF, all channels
can be viewed. Details are on page 23.
The CHANNELCONTROLfunction works hand-in-hand with the
PARENTALCONTROLfunction. It lets you select the channels you
want to lock out. First select the channel number you want to
lock out and then press + or - to change this function from
NORMAL to LOCKED. When the PARENTAL CONTROL function is set
to ON, the channels you locked with this function cannot be
viewed. Details are on page 23.
AUTOPROGRAMcommands the TV to automatically cycle through all
channels and place only active channels for your area in its
channel memory. Pressing the CHANNELup or down buttons will
then only stop on active channels. Details are on page 24.
CHANNELMEMORYis the list of channels the TV will stop on when
you press the CHANNELup or down button. This display lets you
add or erase channels as desired. Details are on page 24.
ANTENNA A]B - Because your TV has two separate antenna inputs
on the back labeled ANTA and ANTB, you can connect two
different signal sources, if desired. By pressing + to change this
display, you can switch back and forth between the two signal
sources. Each time you press +, the antenna input will change.
Details are on page 25.
The CABLE]AIR function tells your TV whether you have a cable-TV
system or a home antenna connected to the "IV. Your TV is so
automatic that you will probably never need to change this
function. When your TV autoprograms, it automatically adjusts
the CABLE/AIRsetting for you. If you should ever need to override
the automatic setting, press + or - to change it.
The CAPTIONINGfeature lets you display the sound of a program as
words on the TV screen. This is useful to the hearing impaired
or anyone who wants to watch a program without the sound.
Four types of closed captioning are available. Select CAPTIONS1
for full translation of the primary language in your area; select
CAPTIONS2 for secondary language translation or alternate
service, such as simplified English. Two Text modes are also
supported. Details are on page 19.
SLEEPTIMERlets you program your TV to turn itself off after a
certain period of time. This is useful whenever you want to
watch TV for an hour or so before going to sleep. Press the +
or - button to select the length of time you want the TV to stay
on. Details are on page 20.
The ALARMfunction lets you program your TV to turn on and/or
off at the time you choose. Details are on page 21.
The VCR 1 CHANNEl. function lets you program to which channel the
TV will automatically tune when you press the VCRabutton on the
remote. Details are on page 26.
The VCR2CHANNELfunction lets you program to which channel the
TV will automatically tune when you press the VCR2button on the
remote. Details are on page 26.
The CABLECHANNELfunction lets you program to which channel the
TV will automatically tune when you press the CABLE button on
the remote. Details are on page 27.
CLOCKSETallows you to set the clock so you'll be able to see the
on-screen time display whenever you change channels or press
the iv or DISPLAY button on the remote control. To set the clock,
first press and hold the - button until the correct hour appears.
Then press and hold the + button until the correct minute appears.
CHANNEL LABELING lets you program names (or labels) for the
channel numbers. The names you select will then appear on the
screen whenever the channel number is displayed. Details are
le
Loading ...
Loading ...
Loading ...