User Manual - Page 96

For ALHAMBRA 2022.

Loading ...
Loading ...
Loading ...
Operation
always take the key with you when you
l
eave the vehicle.
Never remove the key from the ignition if
the vehicle is in motion. Otherwise, the
steering could suddenly block and it would
be impossible to steer the vehicle.
CAUTION
All of the vehicle keys contain electronic
components. Pr
otect them from damage,
impacts and humidity.
Note
Only use the k
ey button when you require
the corresponding function. Pushing the
button unnecessarily could accidentally
unlock the vehicle or trigger the alarm. It is
also possible even when you are outside
the radius of action.
Key operation can be greatly influenced
by overlapping radio signals close to the
vehicle working in the same range of fre-
quencies, for example, radio transmitters or
mobile telephones.
Obstacles between the remote control
and the vehicle, bad weather conditions
and discharged batteries can considerably
reduce the range of the remote control.
If the buttons of the vehicle key are
pressed or one of the central locking but-
tons
››
page 97 is pressed repeatedly in
short succession, the central locking brief-
ly disconnects as protection against over-
l
oading. The vehicle is then unlocked. Lock
it if necessary.
Spare remote control keys are available
at your Technical Service, where they must
be matched to the locking system.
Up to five remote control keys can be
used.
Changing the battery
Fig. 87
Vehicle key: battery compartment cov-
er
.
Fig. 88 Vehicle key: remove the battery.
SEAT recommends you ask a specialised
w
orkshop to replace the battery.
The battery is located to the rear of the vehi-
cle key, under a cover.
Changing the battery
Unfold the vehicle key blade
››
page 93.
Remove the cover from the back of the ve-
hicle key
››
Fig. 87 in the direction of the ar-
row
››
.
Extract the battery from the compartment
using a suit
able thin object
››
Fig. 88.
Place the new battery in the compartment
as shown
››
Fig. 88, pressing in the opposite
direction to that shown by the arrow
››
.
Fit the cover as shown
Fig. 87, pressing it
onto the vehicle key casing in the opposite di-
rection to that shown by the arrow until it
clicks into place.
94
Loading ...
Loading ...
Loading ...