Loading ...
Loading ...
Loading ...
Seats and head restraints
To activate the memory function of the ve-
hicl
e key
Condition: a position must be memorised in
the memory.
●
Open the driver-side door.
●
Press and hold any memory button.
●
Within three seconds of the move being
completed, push the open button on the
vehicle key. An audible warning confirms the
settings have been activated.
Adjusting the wing mirrors for driving and
assigning driver seat settings to a vehicle
key
●
Activate the memory function of the vehicle
key
●
Adjust the front seat and the exterior mir-
rors.
●
Lock the vehicle. The settings are assigned
to the vehicle key.
To deactivate the memory function of the
vehicle key
Condition: a position must be memorised in
the memory.
●
Press and hold the
button
›
››
Fig. 136.
●
Within the following 10 seconds, push the
open button on the vehicle key. An audible
warning confirms the settings have been de-
activated.
Initialising the seat position memory
The position memory system must be restar-
ted if, for example, the driver seat has been
changed.
Restarting deletes all memories and assign-
ments for the seat with position memory. The
memory buttons can then be reprogrammed
and the vehicle keys re-assigned.
●
Open the driver door and do not get into
the vehicle.
●
Operating the seat settings from outside
the vehicle.
●
Tilt the backrest fully forward.
●
Release the control to set the angle and
then press again until an audible warning is
heard.
WARNING
Adjust the memory function only when the
v
ehicle is stationary.
Note
The front passenger side exterior mirror au-
t
omatically changes from the position stor-
ed for reversing as soon as the vehicle
moves forward at a speed of at least
15 km/h (9 mph) or when the gear selection
lever is changed to a position other than R.
Access aid for the third row of seats
Fig. 137
Second row of seats: access aid con-
tr
ols.
The outer seats of the second row can be fol-
ded t
o make it easier to get in and out of the
third row of seats.
Folding down the second row seats
●
If necessary, open the belt loop and wind
up the seat belt by hand.
●
If necessary, remove the side head restraint
of the integrated child seat
›››
page 36.
●
If necessary, raise the armrests.
●
Remove any objects located in the footwell
of the second row of seats, where applicable
›››
.
●
Push the head restraint down as far as it will
go
›
››
page 12.
»
137
Loading ...
Loading ...
Loading ...