Loading ...
Loading ...
Loading ...
Self-help
●
Av
oid heavy acceleration, hard braking
and fast cornering.
●
Drive for only 10 minutes at a maximum
speed of 80 km/h (50 mph) and then check
the tyre.
For the sake of the environment
Dispose of used or expired sealant observ-
ing any l
egal requirements.
Note
A new bottle of sealant can be purchased
at SEAT deal
erships.
Note
Take into account the separate instruction
manual pr
ovided by the tyre mobility sys-
tem manufacturer.
Anti-puncture kit contents
Fig. 41
Standard representation: anti-punc-
t
ure kit contents.
The anti-puncture kit is located underneath
the fl
oor covering in the luggage compart-
ment. It includes the following components
›››
Fig. 41:
Valve insert remover
A sticker to be adhered to the instrument
cluster, within the driver's visual field, to
remind that the maximum advisable
speed “max. 80 km/h” or “max. 50 mph”
Filler tube with cap
Air compressor
ON/OFF switch
Air bleed screw (it can also be integrated
in the inflator tube).
1
2
3
4
5
6
Warning provided by tyre pressure moni-
t
oring system (it can also be integrated in
the inflator tube).
Tube for inflating tyres
12 volt connector
Bottle of sealant
Spare tyre valve
The valve insert remover
1
has a gap at
the l
ower end for a valve insert. The valve in-
sert can only be screwed or unscrewed in this
way. This also applies to its replacement part
11
.
Sealing and inflating a tyre
Sealing the tyre
●
Unscrew the tyre valve cap and insert. Use
the
›
››
Fig. 41
1
tool to remove the insert.
Pl
ace it on a clean surface.
●
Shake the tyre sealant bottle vigorously
›››
Fig. 41
10
.
●
Screw the inflator tube
›
››
Fig. 41
3
into the
seal
ant bottle. The bottle's seal will break au-
tomatically.
●
Remove the lid from the filling tube
›››
Fig. 41
3
and screw the open end of the
t
ube into the tyre valve.
●
With the bottle upside down, empty all of
the contents into the tyre.
»
7
8
9
10
11
43
Loading ...
Loading ...
Loading ...