Loading ...
Loading ...
Loading ...
Emergencies
Recognise a blown fuse
A fuse is bl
own if its metal strip is ruptured
›››
Fig. 60.
●
Point a lamp at the fuse to see if it has
blown.
To replace a fuse
●
If necessary, remove the plastic pincers
from the fuse box cover.
●
Small fuses: fit the pincer in from above
›››
Fig. 61 .
●
Large fuses: move the pincer sideways over
the fuse
›››
Fig. 61 .
●
Remove the fuse.
●
Replace the blown fuse by one with an
identical amperage rating (same colour and
markings) and identical size.
●
Replace the cover again or close the fuse
box lid.
Changing bulbs
Introduction
Changing bulbs requires a certain degree of
pr
actical skill. If you are unsure, SEAT recom-
mends that you consult a technical service or
request assistance from a specialist. In gen-
eral a specialist is needed if, in addition to the
bulbs, other vehicle components require re-
moval.
If you choose to change the engine compart-
ment lamps yourself, remember that it is a
dangerous area
›››
in Working in the en-
gine compar
tment on page 314.
Always use identical bulbs with the same
designation. The name can be found on the
base of the bulb holder.
Bulbs (12 V)
Full-LED headlights are designed to last the
lifetime of the car and light bulbs cannot be
replaced. In case of headlight failure, go to an
authorised workshop to have it replaced.
Light source used for each function
Halogen headlights. Type
Dipped beam headlights H7 LL
Main beam headlights/day-
time running lights (DRL)
H15 (double element)
Side lights W5W
Turn signal PY21W NA LL
AFS bi-xenon main
headlight
Type
Daytime running lights
(DRL)
P21W SLL
Side lights W5W
AFS bi-xenon main
headlight
Type
Turn signal PY21W NA LL
Dipped beam / Main beam
Xenon bulb. Visit an
authorised workshop
for replacement.
Front fog light Type
Fog lights HB4
LED rear lights Type
Side/brake light LED
Turn signal WY21W
Reverse lights W16W
WARNING
●
T
ake particular care when working on
components in the engine compartment if
the engine is warm. Risk of burns.
●
Bulbs are highly sensitive to pressure. The
glass can break when you touch the bulb,
causing injury.
●
When changing bulbs, please take care
not to injure yourself on sharp edges, in
particular on the headlight housing.
60
Loading ...
Loading ...
Loading ...