Loading ...
Loading ...
Loading ...
Lights
2. Press the button to switch on the hazard
w
arning lights
›››
.
3. Stop the engine.
4. Apply the electronic parking brake.
5. For a manual gearbox, engage 1st gear;
f
or an automatic gearbox, move the gear
lever to P.
6. Use the warning triangle to indicate the
position of your vehicle so that it does not
pose a hazard to other road users.
7. Always carry the key with you when leav-
ing the vehicle.
All turn signals flash simultaneously when the
hazard warning lights are switched on. The
two turn signal turn signal lamps and the
turn signal lamp in the switch will flash at
the same time. The simultaneous hazard
warning lights also work when the ignition is
switched off.
Emergency braking warning
If the vehicle brakes suddenly and continu-
ously at a speed of more than 80 km/h (50
mph), the brake light flashes several times per
second to warn the vehicles driving behind. If
you continue braking, the hazard warning
lights will come on automatically when the
vehicle comes to a standstill. They switch off
automatically when the vehicle starts to
move again.
WARNING
●
The risk of an accident incr
eases if your
vehicle breaks down. Always use the haz-
ard warning lights and a warning triangle to
draw the attention of other road users to
your stationary vehicle.
●
Due to the high temperatures that the
catalytic converter can reach, never park
in an area where the catalytic converter
could come into contact with highly inflam-
mable materials, for example dry grass or
spilt petrol. This could start a fire.
Note
●
The batt
ery will run down if the hazard
warning lights are left on for a long time,
even if the ignition is switched off.
●
The use of the hazard warning lights de-
scribed here is subject to the relevant stat-
utory requirements.
Headlight range control
Fig. 118
Next to the steering wheel: headlight
r
ange control.
The headlight range control
›
››
Fig. 118 is
modified according to the value of the head-
light beam and the vehicle load status. This
offers the driver optimum visibility and the
headlights do not dazzle oncoming drivers
›››
.
The headlights can only be adjust
ed when
the dipped beam is switched on.
To reset, turn switch
›››
Fig. 118:
Value Vehicle load status
a)
Two front occupants, luggage compart-
ment empt
y
All seats occupied, luggage compart-
ment empt
y
»
123
Loading ...
Loading ...
Loading ...