Loading ...
Loading ...
Loading ...
Operation
Folding the seats in the second row of
seats f
or loading
●
If necessary, open the belt loop and wind
up the seat belt by hand.
●
If required, remove the head restraints from
the integrated seats for children and refit
them
›››
page 36.
●
If necessary, raise the armrests.
●
Remove objects from the footwell in front of
and behind the rear seat
›››
.
●
Move the rear seat all the way back.
●
Push the head restraint down as far as it will
go
›
››
page 12.
●
In the middle seat, close the drinks carrier in
the rear of the centre console, if necessary.
●
Pull lever
›››
Fig. 143
1
back and fold the
seat backr
est forwards. The complete rear
seat folds forward
›››
.
●
Fold the seat backrest forwards until it locks
int
o the load surface position
›››
Fig. 143 .
●
If necessary, pull on the lever
›››
Fig. 144
2
to move the seat to the required position.
●
When the seat is folded down, no adults or
chil
dren should travel in it
›››
.
F
olding the seats in the third row of seats
for loading
●
If necessary, open the belt loop and wind
up the seat belt by hand.
●
Open the rear lid.
●
Push the head restraint down as far as it will
go
›››
page 12.
●
Remove objects from the footwell in front of
and behind the rear seat
›››
.
●
Remove objects from the space below the
r
ear seat.
●
Remove the attachment elements and sup-
ports for the net from the rail system.
●
Pull lever
›››
Fig. 144
1
back and fold the
seat backr
est forwards. The rear seat folds
forward
›››
and the cushion also moves for-
w
ard.
●
Fold the seat tray forward on top of the fol-
ded seat.
●
When the seat is folded down, no adults or
children should travel in it
›››
.
Putting the seats in the second r
ow back in
place
●
Pull lever
›››
Fig. 143
1
upwards and place
the seat backr
ests in vertical position. The
entire seat folds backwards.
●
Pull on the rear seats and the seat backrest
to ensure that they are correctly locked in
place and that the seat belt protection is
guaranteed for rear seat passengers.
Putting the seats in the third row back in
place
●
Open the rear lid.
●
Pull on the handle
›››
Fig. 144
2
to put the
seat tr
ay back in position.
●
Pull the handle
›››
Fig. 144
3
. The entire
seat f
olds backwards.
●
Press on the seat tray in the seat backrest
until it is held in position by its magnets.
●
Open the sliding door.
●
Put the seat backrest into position and
press firmly until it clicks into place.
●
Pull on the rear seats and the seat backrest
to ensure that they are correctly locked in
place and that the seat belt protection is
guaranteed for rear seat passengers.
WARNING
Folding and lifting the rear seats carelessly
without paying att
ention could cause seri-
ous injury.
●
Never fold or lift the seats while driving.
●
Do no trap or damage seat belts when
raising the seat backrest.
●
Keep your hands, fingers, feet and other
body parts out of the hinges and the seat
locking mechanism when folding and un-
folding.
●
Mats or other objects can be caught in
the hinges of the seat backrests or rear
seat. This could prevent the seat or seat
backrest from locking securely in the verti-
cal position.
144
Loading ...
Loading ...
Loading ...