Loading ...
Loading ...
Loading ...
Emergencies
●
Pr
ess the trim against the wheel so that the
valve hole is in the same position as the tyre's
valve
›››
Fig. 46
1
. Make sure that the trim is
corr
ectly fitted all the way around the wheel.
Wheel bolt caps
Fig. 43
Wheel: wheel nuts with caps.
Removal
●
Fit the plastic clip (vehicle tools
›
››
Fig. 39)
over the cap until it clicks into place
›››
Fig. 43.
●
Remove the cap with the plastic clip.
The caps protect the wheel bolts and should
be remounted after changing the tyre.
The anti-theft wheel locking bolt has a
special cap. This only fits on anti-theft locking
bolts and is not for use with standard wheel
bolts.
Anti-theft wheel nuts
Fig. 44
Anti-theft wheel bolt with cap and
adapt
er.
Loosening the anti-theft wheel bolt
●
Remove the wheel trim or hub cap.
●
Insert the special adapter
›
››
Fig. 44
1
(ve-
hicl
e tools
›››
page 41) onto the anti-theft
wheel bolt and push it on as far as it will go.
●
Insert the wheel brace (vehicle tools) onto
the adapter as far as it will go.
●
Remove the wheel bolt
›››
page 46.
Note
Make a note of the code number of the an-
ti-theft wheel bolt and k
eep it in a safe
place, but not in your vehicle. If you need a
new adapter, you can obtain it from the
SEAT Official Service, indicating the code
number.
Loosening wheel nuts
Fig. 45
Wheel change: loosen the wheel nuts.
Fig. 46
Wheel change: tyre valve
1
and the
corr
ect position for the anti-theft wheel locking
bolt
2
or
3
.
Use only the wheel wrench belonging to the
car t
o loosen the wheel bolts.
Loosen the wheel bolts only about one turn
before raising the vehicle with the jack.
46
Loading ...
Loading ...
Loading ...