Loading ...
Loading ...
Loading ...
Fuses and bulbs
CAUTION
●
R
emove the ignition key before working
on the electric system. Otherwise, a short
circuit could occur.
●
Switch off the lights and the parking light
before changing a bulb.
●
Take good care to avoid damaging any
components.
For the sake of the environment
Please ask your specialist retailer how to
dispose of used bulbs in the pr
oper manner.
Note
●
Pl
ease check at regular intervals that all
lighting (especially the exterior lighting) on
your vehicle is functioning properly. This is
not only in the interest of your own safety,
but also that of all other road users.
●
Before changing a bulb, make sure you
have the correct new bulb.
●
Do not touch the glass part of the bulb
with your bare hands, use a cloth or paper
towel instead, since the fingerprints left on
the glass will vaporise as a result of the
heat generated by the bulb, they will be
deposited on the reflector and will impair
its surface.
●
Depending on the level of equipment fit-
ted in the vehicle, LEDs may be used for
part or all of the interior and/or exterior
lighting. LEDs have an estimated life that
exceeds than that of the car. If an LED light
f
ails, go to an authorised workshop for its
replacement.
Replacing the halogen headlight
bulbs
Fig. 62 In the engine compartment: coatings
on the l
eft headlight.
Fig. 63 Left headlight.
Dipped beam headlights
Daytime running lights
Main beam headlight and side light
T
urn signals
There is no need to remove the headlight to
replace bulbs.
Complete operations only in the sequence
given:
Turn signals (small bulb holder)
–
Open the bonnet .
–
Rotate the bulb holder
›››
Fig. 62
1
all the
w
ay to the left and pull it out backwards to-
gether with the bulb.
–
Depending on the model, the bulb is re-
moved directly from the bulb holder or it
may need to be rotated and then removed.
–
Replace the faulty bulb with a new identical
bulb.
–
Place the bulb holder in the headlight and
rotate to the right all the way.
A
Dipped beam headlights and
B
Day-
time running lights
–
Open the bonnet .
–
Remove the rubber cover on the rear of the
headlight.
»
A
B
C
1
61
Loading ...
Loading ...
Loading ...