Loading ...
Loading ...
Loading ...
By connecting the Palmcorder and PC with
the USB Cable, you can transfer Motion
images and Still images saved on the DV
Tape directly to your PC.
2PLAY Button
Before you begin
• Insert a recorded tape. (See page 9.)
• Make Palmcorder-PC connections.
(See page 54.)
• Turn your PC on. (See page 54.)
• Set Palmcorder POWER to VCR.
Repeat steps 1~4 on page 57 to
run the PHOTOVU LINK/Movie
Messenger.
CAPTURE
-3MOVIE
CAPTURE
Click on [STILL CAPTURE] at the point
you wish to capture an image.
• Repeat step 3 to continue capturing
images.
• Captured Still images are saved to the
PC, and you can playback the saved
images on the Image Browser. (See
page 59.)
58
•When the USB Cable is connected,
the input display will automatically
become USB. If it is not USB, please
confirm the connection. Then, close
and restart the software.
Click I_ (PLAY) on PC screen to
playback the DV tape,
• The playback screen cannot be
viewed on the PC. Please use the
LCD monitor on the Palmcorder for
confirmation.
Click on [MOVIE CAPTURE] at the start
point you wish to capture a Motion
nmage.
Click [MOVIE CAPTURE] or [STOP] to
end capture.
• "Now Searching" is displayed.
• The DV Tape is rewound to the point
at which the capture was started. The
Motion image is then transferred to the
PC.
• "Data transfer is now in progress" is
displayed on the PC screen.
• The maximum capture time is approx,
30 seconds. Capture stops
automatically at the end of 30 seconds,
• Motion images cannot be captured if data
contains the following...
• A change between 12 bit and 16 bit.
• A change between SP and LP mode.
• During transfer to the PC, the Motion
images will not be displayed on the PC
screen.
• Transfer takes from about 30 to 50
seconds for every 1 second of the Motion
image.
To capture other Motion images, repeat
steps 3~4.
Loading ...
Loading ...
Loading ...