Loading ...
Loading ...
Loading ...
You can record still images from a
cassette tape to a Memory Card.
• Memory Card will not work when DV
interface Cable (i.LINK) is connected.
4PHOTOSHOT
JOG KEY Button
Bu_on
M-CARD Lock r..._Or:'OWER
Switch
Switch
3PLAY Button
Bu_on
You can view the images on the Memory
Card.
M-CARD Lock Switch
1POWER Switch
Before you begin 1
Connect the Palmcorder to a power
source. (See pages 11, t 2.)
• Set POWER to OFF before inserting a
Memory Card. (See page 10.)
1 Repeat steps 1 and 2 on page 32.
3
Set POWER to VCR.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
VCR position.
Press PLAY to start playback of the
cassette tape. And then, press PAUSE
to select an image.
Press PHOTOSHOT to record the
desired image to the Memory Card.
• When PHOTOSHOT is pressed in
PLAY or SLOW mode, the screen
goes to STOP mode.
• To playback the images of the
Memory Card, see pages 33~34.
• When Vanable Speed Search is
done (see page 29), this feature can
not be used.
Repeat steps 3-4 to record another
image to the Memory Card.
-Before you begin
• Connect the Palmcorder to a power
source. (See pages 11, 12.)
• Set POWER to OFF before inserting a
recorded Memory Card.
(See pages 32, 33.)
i
Slide the M-CARD Lock Switch to
unlock, then set POWER to M-CARD.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
M-CARD position.
• "PLAY: PUSH PLAY KEY" is
displayed for t0 seconds.
PUBH PLAY KEY
(Continued on next page.)
33
Loading ...
Loading ...
Loading ...