Loading ...
Loading ...
Loading ...
You can record still images to a Memory
Card.
-AEFJ31_]
• Memory Card will not work when DV
interface Cable (i.LINK) is connected.
3PHOTOSHOT
2JOG KEY Button
2MENi
Button
Switch
Lock
1POWER
Switch
Image Resolution and Capacity
(supplied .8MB MultiMediaCard)
FINE 640 x 480 Approx. 60 images
NORMAL 320 x 240 Approx. 240 images
• The number of images gtven for each mode
apphes when all images are taken m same mode.
• You can change recording modes at any time
before capturing an image.
• The number of images that can be captured may
differ depending on the subject. After capturmg an
umage, the number may not decrease, or it may
decrease by two. Thts ts normal
• Whde "PROCESSING" _sdisplayed, DO
NOT turn off the Palmcorder or unplug
the AC Adaptor (supplied) because thts
will cause irreversible damage to the
memory.
efore you begin 1
Connect the Palmcorder to a power
source. (See pages 11, 12.)
• Set POWER to OFF before inserting a
Memory Card. (See page 10.)
1
2
3
Slide the M-CARD Lock Switch to
unlock, then set POWER to M-CARD.
• The POWER lamp lights red.
• Be sure POWER is fully turned to
M-CARD position.
• "PLAY: PUSH PLAY KEY" is
displayed for 10 seconds.
(See page 33.)
Press MENU to display CARD
SETTING menu, then press JOG KEY
to select _ orl-dT[q-=l.
• Press MENU to exit this menu.
Press PHOTOSHOT to record an
image.
E" oo.o,S"°*°
• The PhotoShot image ts recorded to
the Memory Card.
• When SHUTTER is set to ON (see
page 15), still pictures are recorded
w_th a wsual shutter effect and click
sound. If set to OFF, the still
image will be displayed only.
r- Cautions for the Memory Card
• While Memory Card data is being read, do not remove it, turn off the power, or subJeCt
unit to vibrattons and shocks
• Do not leave the Memory Card in a place with high temperature, exposed to direct
sunlight, or where electromagnetic waves and static electrictty can be generated.
• Electromagnetic waves, static electrictty, malfunction of the Palmcorder or of the
Memory Card itself could erase the data recorded on it. To prevent the loss of picture
data, we recommend that you make a backup copy on the computer.
• Do not bend or drop the Memory Card as this could damage it or the captured
contents.
• Do not touch the connector on the rear edge of the Memory Card wnth your fingers and
take care that no dirt, dust or water enters it.
• Do not affix other labels to the Memory Card face or back as Card insertion/removal
_, may become impossnble.
32
Loading ...
Loading ...
Loading ...