Loading ...
Loading ...
Loading ...
Source (Playing)
Palmcorder
)UT
-Before you begin
• Connect both Palmcorder and VCR to
their power sources.
• Connect the Palmcorder to a VCR as
illustrated left.
• Turn ON both units.
• Set the recording VOR's Input Signal
Selector to LINE.
• Set the Palmcorder POWER Switch to
VCR.
OUT 1
Insert a pre-recorded tape
into the source (playing) Palmcorder
and a blank tape, with record tab in
place, into the target VCR (Recorder).
(Supplied)
2
(To View)
Connecting
Cable (not Cable (not
supplied) supplied) 3
Audio In Video In
Press PLAY on the Palmcorder. When
the tape reaches the point you want to
start dubbing, press PAUSE.
Place the VCR into REC/PAUSE
mode. (See VCR manual.)
To Audio In 4
Recording:
VCR (Rear)
S-Video In
To Video In
To S-Video In
(If there is S-Video In)
5
Simultaneously, press PAUSE on
both units to begin copying.
Press STOP on both units when
copying is completed.
• Turn the TV ON and select its VCR
channel (either CH3 or CH4).
• Set the VCR/TV Selector on the
recording VCR to VCR.
• For technical reasons, dubbing a tape
may reduce its quality.
• Press DISPLAY on the Palmcorder
remote control (optional, page 64) to
eliminate EVF/LCD Monitor indications.
• If the Time Code is displayed in the EVF
or LCD monitor, it cannot be reset.
• Only the DATE/TIME, when displayed,
will be recorded on the tape.
FcUnnCAUTION:
|
authorized exchanging and/or copying of |
pynghted recordings may be copyright
nngement
5
Loading ...
Loading ...
Loading ...