Loading ...
Loading ...
Loading ...
POWER Lain
CHARGE
Connect and plug in the Power Cord
as shown.
• POWER Lamp will light.
Remove the DC Cable, if attached,
from the adaptor.
Attach the Battery as shown to
charge.
• CHARGE Lamp lights up. It goes out
when charging is complete (approx.
1 hour). Expect approx. 1 hour
30 minutes of operation (EVF usage)
when fully charged.
Remove the Battery.
Slide the Battery out and then lift up.
About the Flashing of the CHARGE Lamp
• Charge the Battery within an ambient temperature range of t0 °C and 30 °C.
• If charging is done in extreme low or high temperatures, Battery charge time increases.
CHARGE Lamp flashes when,.,
• The Battery is being charged, but charging is taking longer than normal.
• Charging is not possible. Remove the Battery once, wait a short time, then re-attach it
for charging.
1
2
Slide the Vlewfinder backward to its
fully extended position and then tilt it
upward. (For model PV-DV201, tilt
Viewfinder upward.)
Insert the Battery Pack and slide it
down until it locks with a click.
BATTERY
RELEASE
Switch
To remove the Battery Pack:
Slide the Battery upward while sliding the
BA'n'ERY RELEASE Switch.
11
Loading ...
Loading ...
Loading ...