Loading ...
Loading ...
Loading ...
Bevel Lock
The bevel lock is used to hold the blade at
various angles to the table. To unlock the
bevel lock, move the lock to the right. Always
hold the motor when you unlock the bevel
lock. (Figure 46)
'_, CAUTION' The motor is heavy and
can swing down quickly. You can be cut
or injured by the arbor shaft or blade.
Hold the motor when you unlock the
bevel lock.
Fig. 44 - Miter Lock - Unlocked
To lock the miter lock, push the lock to the
left. (Figure 45)
Fig. 46- Bevel Lock - Unlocked
Fig. 45 - Miter Lock - Locked
There are three pre-set miter angles at 45 °,
0°, and -45 °. You will feel the radial arm
snap into position at these miter angles. To
unlock the arm when it is in one of these posi-
tions, pull the miter lock all the way to the
right and move the arm as you hold the lock
in this position.
To lock the bevel lock, move the lock to the
left. (Figure 47)
Fig. 47 - Bevel Lock - Locked
2O
Loading ...
Loading ...
Loading ...