Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 67
Headlight Switch
The headlight switch is located on the left side of the instru-
ment panel. This switch controls the operation of the head-
lights, parking lights, automatic headlights (if equipped),
instrument panel lights, and fog lights (if equipped).
Headlight Switch
Rotate the headlight switch clockwise to the first detent for
parking light and instrument panel light operation. Rotate
the headlight switch to the second detent for headlight,
parking light and instrument panel light operation.
Daytime Running Lights (DRLs) — If Equipped
The Daytime Running Lights will turn on when the engine is
started and remain on unless the headlamps are turned on,
the parking brake is applied, or the engine is cycled to OFF.
NOTE:
If allowed by law in the country in which the vehicle was
purchased, the Daytime Running Lights can be turned on
and off using the Uconnect System, refer to “Uconnect
Settings” in “Multimedia” for further details.
High/Low Beam Switch
Push the multifunction lever, located on the left side of the
steering wheel, away from you to switch the headlights to
high beam. Pull the multifunction lever toward you to switch
the headlights back to low beam.
Automatic High Beam Headlamp Control — If
Equipped
The Automatic High Beam Headlamp Control system provides
increased forward lighting at night by automating high beam
control through the use of a digital camera mounted on the
inside rearview mirror. This camera detects vehicle specific
light and automatically switches from high beams to low beams
until the approaching vehicle is out of view.
2
2020_JEEP_CHEROKEE_OM_USA=GUID-B9F8E23F-10A5-4D6C-A585-BCFF41CCB747=1=en=.book Page 67
Loading ...
Loading ...
Loading ...