Loading ...
Loading ...
Loading ...
STARTING AND OPERATING 305
Brake Alert
NOTE:
The “BRAKE!” Screen in the instrument cluster display is a
warning for the driver to take action and does not necessarily
mean that the Forward Collision Warning system is
applying the brakes autonomously.
Overtake Aid
When driving with Adaptive Cruise Control (ACC) engaged
and following a vehicle, the system will provide an addi-
tional acceleration up to the ACC set speed to assist in
passing the vehicle. This additional acceleration is triggered
when the driver utilizes the left turn signal and will only be
active when passing on the left hand side.
ACC Operation At Stop
If the ACC system brings your vehicle to a standstill while
following a target vehicle, if the target vehicle starts moving
within two seconds of your vehicle coming to a standstill,
your vehicle will resume motion without the need for any
driver action.
If the target vehicle does not start moving within two
seconds of your vehicle coming to a standstill, the driver will
either have to push the RES button, or press the accelerator
to reengage the ACC to the existing set speed.
NOTE:
After the ACC system holds your vehicle at a standstill for
approximately three consecutive minutes, the parking brake
system will be activated and the ACC system will be
cancelled.
While ACC with stop is holding your vehicle at a standstill,
if the driver seatbelt is unbuckled or the driver door is
opened, the ACC with stop system will cancel and the brakes
will ramp-out. Driver intervention will be required at this
moment.
5
2020_JEEP_CHEROKEE_OM_USA=GUID-B9F8E23F-10A5-4D6C-A585-BCFF41CCB747=1=en=.book Page 305
Loading ...
Loading ...
Loading ...