Loading ...
Loading ...
Loading ...
SAFETY 255
Installing Child Restraints Using The Top Tether
Anchorage
1. Look behind the seating position where you plan to install
the child restraint to find the tether anchorage. You may
need to move the seat forward to provide better access to the
tether anchorage. If there is no top tether anchorage for that
seating position, move the child restraint to another position
in the vehicle if one is available.
2. Route the tether strap to provide the most direct path for the
strap between the anchor and the child seat. If your vehicle
is equipped with adjustable rear head restraints, raise the
head restraint, and where possible, route the tether strap
under the head restraint and between the two posts. If not
possible, lower the head restraint and pass the tether strap
around the outboard side of the head restraint.
Tether Anchorage Locations
WARNING!
Do not attach a tether strap for a rear-facing car seat to any
location in front of the car seat, including the seat frame or a
tether anchorage. Only attach the tether strap of a
rear-facing car seat to the tether anchorage that is approved
for that seating position, located behind the top of the
vehicle seat. See the section “Lower Anchors and Tethers
for CHildren (LATCH) Restraint System” for the location of
approved tether anchorages in your vehicle.
4
2020_JEEP_CHEROKEE_OM_USA=GUID-B9F8E23F-10A5-4D6C-A585-BCFF41CCB747=1=en=.book Page 255
Loading ...
Loading ...
Loading ...