Loading ...
Loading ...
Loading ...
56 GETTING TO KNOW YOUR VEHICLE
Front Heated Seats — If Equipped
The front heated seats control buttons are located within the
Uconnect system. You can gain access to the control buttons
through the climate screen or the controls screen.
• Press the heated seat button once to turn the HI setting
on.
• Press the heated seat button a second time to turn the
LO setting on.
• Press the heated seat button a third time to turn the
heating elements off.
The level of heat selected will stay on until changed by the
operator.
NOTE:
The engine must be running for the heated seats to operate.
Vehicles Equipped With Remote Start
On models that are equipped with remote start, the driver’s
heated seat can be programmed to come on during a remote
start.
This feature can be programmed through the Uconnect
system. Refer to “Uconnect Settings” in “Multimedia” for
further information.
Rear Heated Seats — If Equipped
On some models, the two outboard rear seats are equipped
with heated seats. The heated seat switches for these seats are
located on the rear of the center console.
There are two heated seat switches that allow the rear
passengers to operate the seats independently. Amber indi-
cator lights in each switch indicate the level of heat in use.
WARNING!
• Persons who are unable to feel pain to the skin because
of advanced age, chronic illness, diabetes, spinal cord
injury, medication, alcohol use, exhaustion or other
physical condition must exercise care when using the
seat heater. It may cause burns even at low tempera-
tures, especially if used for long periods of time.
• Do not place anything on the seat or seatback that insu-
lates against heat, such as a blanket or cushion. This
may cause the seat heater to overheat. Sitting in a seat
that has been overheated could cause serious burns due
to the increased surface temperature of the seat.
2020_JEEP_CHEROKEE_OM_USA=GUID-B9F8E23F-10A5-4D6C-A585-BCFF41CCB747=1=en=.book Page 56
Loading ...
Loading ...
Loading ...