Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 57
Two indicator lights will illuminate for HI, one for LO and
none for off.
• Push the heated seat button once to turn the HI setting
on.
• Push the heated seat button a second time to turn the
LO setting on.
• Push the heated seat button a third time to turn the
heating elements off.
NOTE:
• Once a heat setting is selected, heat will be felt within two
to five minutes.
• The engine must be running for the heated seats to operate.
When the HI-level setting is selected, the heater will provide
a boosted heat level during the first four minutes of opera-
tion. Then, the heat output will drop to the normal HI-level.
The level of heat selected will stay on until changed by the
operator.
Front Ventilated Seats — If Equipped
Located in the seat cushion and seat back are fans that draw
the air from the passenger compartment and move air
through fine perforations in the seat cover to help keep the
driver and front passenger cooler in higher ambient
temperatures. The fans operate at two speeds, HI and LO.
The front ventilated seats control buttons are located within
the Uconnect system. You can gain access to the control
buttons through the climate screen or the controls screen.
• Press the ventilated seat button once to choose HI.
• Press the ventilated seat button a second time to choose
LO.
• Press the ventilated seat button a third time to turn the
ventilated seat off.
NOTE:
The engine must be running for the ventilated seats to
operate.
Vehicles Equipped With Remote Start
On models that are equipped with remote start, the driver’s
ventilated seat can be programmed to come on during a
remote start.
This feature can be programmed through the Uconnect
system. Refer to “Uconnect Settings” in “Multimedia” for
further information.
2
2020_JEEP_CHEROKEE_OM_USA=GUID-B9F8E23F-10A5-4D6C-A585-BCFF41CCB747=1=en=.book Page 57
Loading ...
Loading ...
Loading ...