Loading ...
Loading ...
Loading ...
162 GETTING TO KNOW YOUR INSTRUMENT PANEL
— LaneSense Indicator Light — If Equipped
The LaneSense indicator light illuminates solid green when
both lane markings have been detected and the system is
“armed” and ready to provide visual and torque warnings if
an unintentional lane departure occurs.
Refer to “LaneSense — If Equipped” in “Starting And Oper-
ating” for further information.
— Park/Headlight On Indicator Light
This indicator light will illuminate when the park lights or
headlights are turned on.
— Stop / Start Active Indicator Light
This telltale will illuminate when the Stop/Start function is
in “Autostop” mode.
— Turn Signal Indicator Lights
When the left or right turn signal is activated, the turn signal
indicator will flash independently and the corresponding
exterior turn signal lamps will flash. Turn signals can be acti-
vated when the multifunction lever is moved down (left) or
up (right).
NOTE:
• A continuous chime will sound if the vehicle is driven
more than 1 mile (1.6 km) with either turn signal on.
• Check for an inoperative outside light bulb if either indi-
cator flashes at a rapid rate.
White Indicator Lights
— Active Speed Limiter Ready Indicator Light — If
Equipped
This light will turn on when the Active Speed Limiter is on,
but not set.
/ — Adaptive Cruise Control (ACC) Ready Light —
If Equipped
This light will turn on when Adaptive Cruise Control (ACC)
has been turned on, but is not set. Refer to “Adaptive Cruise
Control ” in “Starting And Operating” for further informa-
tion.
2020_JEEP_CHEROKEE_OM_USA=GUID-B9F8E23F-10A5-4D6C-A585-BCFF41CCB747=1=en=.book Page 162
Loading ...
Loading ...
Loading ...