Loading ...
Loading ...
Loading ...
282 STARTING AND OPERATING
4WD LOW
This range is for low speed four-wheel drive. It provides an
additional gear reduction which allows for increased torque
to be delivered to both the front and rear wheels while
providing maximum pulling power for loose, slippery road
surfaces only. Do not exceed 25 mph (40 km/h).
NOTE:
Refer to “Selec-Terrain — If Equipped” for further informa-
tion on the various positions and their intended usages.
Shifting Procedures
Shifting Into 4X4 LOW
With the vehicle at speeds of 0 to 3 mph (0 to 5 km/h), the
ignition in the ON mode and the engine running, shift the
transmission into NEUTRAL, and push the “4WD LOW”
button once. The “4WD LOW” indicator light in the instru-
ment cluster will begin to flash and remain on solid when the
shift is complete.
Selec-Terrain Switch
WARNING!
You or others could be injured or killed if you leave the
vehicle unattended with the power transfer unit in the
NEUTRAL (N) position without first fully engaging the
parking brake. The NEUTRAL (N) position disengages
both the front and rear driveshafts from the powertrain
and will allow the vehicle to roll, even if the
transmission is in PARK. The parking brake should
always be applied when the driver is not in the vehicle.
2020_JEEP_CHEROKEE_OM_USA=GUID-B9F8E23F-10A5-4D6C-A585-BCFF41CCB747=1=en=.book Page 282
Loading ...
Loading ...
Loading ...