Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 53
Driver Memory Switch
Programming The Memory Feature
To create a new memory profile, perform the following:
NOTE:
Saving a new memory profile will erase an existing profile
from memory.
1. Place the vehicle’s ignition in the ON/RUN position.
2. Adjust all memory profile settings to desired preferences
(i.e., seat, side mirror and radio station presets).
3. Push and release the set (S) button on the memory switch,
then push memory button (1) within five seconds. The
instrument cluster display will display which memory
position is being set.
If desired, a second memory profile can be stored into
memory as follows:
1. Place the vehicle’s ignition in the ON/RUN position.
2. Adjust all memory profile settings to desired preferences
(i.e., seat, side mirror and radio station presets).
3. Push and release the set (S) button on the memory switch,
then push memory button (2) within five seconds. The
instrument cluster display will display which memory
position is being set.
NOTE:
• Memory profiles can be set without the vehicle in PARK,
but the vehicle must be in PARK (P) to recall a memory
profile.
• To set a memory profile to your key fob, refer to “Linking
And Unlinking The Remote Keyless Entry Key Fob To
Memory” in this section.
2
2020_JEEP_CHEROKEE_OM_USA=GUID-B9F8E23F-10A5-4D6C-A585-BCFF41CCB747=1=en=.book Page 53
Loading ...
Loading ...
Loading ...