Loading ...
Loading ...
Loading ...
420 IN CASE OF EMERGENCY
(Continued)
Tire Service Kit Usage Precautions
• Replace the Tire Service Kit Sealant Bottle and Sealant
Hose prior to the expiration date (printed at the upper
right hand corner on the bottle label) to assure optimum
operation of the system. Refer to “Sealing A Tire With Tire
Service Kit” section (F) “Sealant Bottle And Hose Replace-
ment” in this section for further information.
Tire Service Kit Sealant Expiration Date Location
• The Sealant Bottle and Sealant Hose are a one tire applica-
tion use and need to be replaced after each use. Always
replace these components immediately at your original
equipment vehicle dealer.
• When the Tire Service Kit sealant is in a liquid form, clean
water and a damp cloth will remove the material from the
vehicle or tire and wheel components. Once the sealant
dries, it can easily be peeled off and properly discarded.
• For optimum performance, make sure the valve stem on
the wheel is free of debris before connecting the Tire
Service Kit.
• You can use the Tire Service Kit air pump to inflate bicycle
tires. The kit also comes with two needles, located in the
Accessory Storage Compartment (on the bottom of the air
pump) for inflating sport balls, rafts, or similar inflatable
items. However, use only the Air Pump Hose and make
sure the Mode Select Knob is in the Air Mode when
inflating such items to avoid injecting sealant into them.
The Tire Service Kit Sealant is only intended to seal punc-
tures less than 1/4 inch (6 mm) diameter in the tread of
your tire.
• Do not lift or carry the Tire Service Kit by the hoses.
WARNING!
• Do not attempt to seal a tire on the side of the vehicle
closest to traffic. Pull far enough off the road to avoid
the danger of being hit when using the Tire Service Kit.
2020_JEEP_CHEROKEE_OM_USA=GUID-B9F8E23F-10A5-4D6C-A585-BCFF41CCB747=1=en=.book Page 420
Loading ...
Loading ...
Loading ...